Operator from ECR has to verify that plates is in center for shear to work properly. Needed a good visible laser line on dark plates. Laser length up to 20mtrs. Z-laser designed the next generation green laser with high output power. Visible on dark surfaces with limited impact from ambient...

Monitoring and detection of the hot axle box bearing temperature (detection of bearings presenting a risk of failure). Task was to measure temperature of the the running train axle box / wheel Home  Case Studies Hot axle box/ wheel temperature detection Hot axle box/ wheel temperature detection Home    Case Studies...

On high grade rolling, the exit coil temperature radiated heat leading malfunctioning of signal of existing light barrier. Water cooling line provision was not available. Reliable coils detection regardless of their temperature, cold or warm, up to 600°C.Home  Case Studies Coil detection Coil detection Home    Case Studies    Pilger...

Due to low temperature of the strip at the laminar table, the response from a standard scanning type HMD was unstable. Proxitron light barrier was installed at the down coiler. It provided higher functional reserve up to 750 mHome  Case Studies Strip detection after laminar cooling Strip detection after laminar...

Home  Case Studies Retrofitting AvailabilityThe blast furnace skip hoist is protected against overspeed on the motor side by a mechanical overspeed switch with integrated speed increasing gear. The universal encoder system U-ONE® is to replace the outdated sensor systems on both the motor and drum sides. Thanks to its modular design it is...

To calculate the flow of water via measuring the tilt angle of radial gate. Safety limit detection i.e. Indication if the radial gate is fully open or fully closed. Environment conditions included high humidity and huge vibrations.Home  Case Studies Tilt Angle Sensor For Radial Gate Positioning Tilt Angle Sensor For...

Home  Case Studies Robust encoders ensure more precision and less downtimesThe skip-car control mechanism utilised to date included two mechanical, geared cam limit switches that are time consuming to program. Upgrading to meet modern demands required suitable components for measuring actual values that are not only characterized by their high...

Fundamentally improve the operating reliability and positioning accuracy of the ladle crane hoist used in steel production. Installation of the modular universal encoder system U-ONE, which offers the following special characteristics • Basic unit mounted directly at the hoist drum by using a double joint coupling on a tailor-made base...

Compact IR thermal imaging camera was installed to provide a temperature map of the bottom shell. The cameral scans the full bottom of the shell giving options to define multiple areas /ROI to get 4-20mA output. Software automatically finds hot spots enable timely preventative maintenance.Home  Case Studies Converter / Lance...

Measure the bottom/ under-strip temperature. Measure the bottom profile temperature to prevent hook-up / cobble. Technology now available for both point and profile bottom side temperature measurement. Compare the edge temperature difference between operator and drive sideHome  Case Studies Prevent strip cobble due to hook-up Prevent strip cobble due to...