Tapping temperature in Cast Iron Foundry. Reduction in power consumption as overheating is prevented due to frequent temp readings. High accuracy as result within +/-50C compared to thermocouple dip type. Plug and play system, commissioned with one heat. Reduction in consumable costs by 70%Home  Case Studies Molten tapping temperature measurement...

Home  Case Studies Foundry: Cast Iron and Pouring of Molten Metal Foundry: Cast Iron and Pouring of Molten Metal Short measurement wavelength of 0.5μm Wide temperature range : 1000 to 2000°CDual Laser spot for target alignment and LCD displayData storage up to 2000 measurement values and USB connect to PC Challenges...

High rejection rate  due to inaccurate temperature. Due to moving process difficult  define measuring point, where the temperature has to measured. Thermal camera provides multiple ROIs (areas) for full profile measurement. Auto HOT SPOT tracker for max process temperature.Home  Case Studies Profile (Multi-point) Temperature on Induction Heating Profile (Multi-point) Temperature...

Thermal camera provide multiple ROIs and area measurement. Auto HOT SPOT tracker penetrate thru out scale. Longer FOV provide shape analysis and temperature. Advanced cool housing water based 315°C. Analog/ USB 2.0 and Ethernet GgE/ PoEHome  Case Studies Open Die Forging Open Die Forging Home    Case Studies    Pilger...

Ratio technology resistant to dust/ dirty windows. Electronic were 3mtrs away from induction coil to minimize the impact of EMC interferences. 200  degrees C ambient temperature without any cooling. M18 compact space saving installations. Dual output (4-20mA) for controller and displayHome  Case Studies Ratio Pyrometer for Vertical Billet Induction Heating...

IR heating take place inside of closed chamber. For safety precautions it is recommended to keep chamber must be sealed to avoid the IR leakage. Dual Laser pointed IR sensor (Pyrometers) provides widest temperature measuring range and special spectral range 1.6µm.Home  Case Studies Infrared Heating : Profile temperature measurement Infrared...

To automate a coil tong, light barriers should be mounted on the lower end of the gripper to safely detect the hole in the coil. The coils can be sometimes up to 600 °C hot. For each coil tong, three light barriers are needed to detect the lower edge and...

High demands are placed on the sensor since rolling emulsions are used for surface finishing. The environment is of very high ambient temperatures. PTFE does not allow water or chemical solvents to stick on its surface and has a high melting point of 423⁰ C. Both F/HF 2/3/4/W constructs with...

Continuous high temperature poses serious challenges to the proximity. 70 °C proximity is unable to survive in this environment, and it fails. Proximity from Proxitron was used for the application of air knife positioning.Home  Case Studies Air knife positioning Air knife positioning system Home    Case Studies    Pilger mill...

Home  Case Studies Profile temperature measurement Profile temperature measurement for improved strip quality Profile temperature measurement to ensure quality of rolling and prevent cobbleCompare edges temperature and centre to adjust the spray headers/ furnaceMeasure drop out temperature at exit of furnace even in presence of high oxidationMeasure the bottom profile...